EU declaration of conformity under the Cyber Resilience Act
4 min read
With the EU declaration of conformity, the manufacturer assumes responsibility for the product meeting the requirements of the Cyber Resilience Act. Instead of the full declaration, a simplified version may accompany the product – with a link to the full one. This guide shows structure, content and pitfalls.
When the declaration is drawn up
Art. 13(12) sets out the sequence before placing on the market:
- draw up the technical documentation referred to in Art. 31,
- carry out the chosen conformity assessment procedure referred to in Art. 32, or have it carried out,
- where compliance with Annex I, Parts I and II, has been demonstrated: draw up the EU declaration of conformity in accordance with Art. 28 and affix the CE marking in accordance with Art. 30.
By drawing up the declaration, the manufacturer assumes responsibility for the compliance of the product (Art. 28(4)). These obligations apply from 11 December 2027 (Art. 71(2)).
Source: Art. 13(12) CRA · Art. 28(1) and (4) CRA · Art. 71(2) CRA
Content of the full declaration (Annex V)
The EU declaration of conformity follows the model structure in Annex V and contains:
- name and type of the product and any additional information enabling its unique identification,
- name and address of the manufacturer or its authorised representative,
- a statement that the declaration is issued under the sole responsibility of the provider,
- the object of the declaration (identification of the product allowing traceability, which may include a photograph where appropriate),
- a statement that the object of the declaration is in conformity with the relevant Union harmonisation legislation,
- references to the harmonised standards, common specifications or cybersecurity certifications applied,
- where applicable, the name and number of the notified body, a description of the conformity assessment procedure performed and the identification of the certificate issued,
- additional information, place and date of issue, name, function and signature.
Source: Annex V CRA · Art. 28(2) CRA
Language, updates, several legal acts
- The declaration is translated into the language or languages required by the Member State in which the product is placed or made available on the market. This also applies to the simplified version (Art. 28(2)).
- It is continuously updated as appropriate (Art. 28(2)).
- Where the product is subject to more than one Union legal act requiring an EU declaration of conformity, a single declaration is drawn up for all of them – identifying the legal acts and their publication references in the Official Journal (Art. 28(3)).
Source: Art. 28(2) and (3) CRA
The simplified declaration (Annex VI)
The product is accompanied either by a copy of the full declaration or by a simplified declaration (Art. 13(20)). Under Annex VI, the simplified version has a fixed wording:
“Hereby, … [name of manufacturer] declares that the product with digital elements type … [designation of type of product with digital element] is in compliance with Regulation (EU) 2024/2847. The full text of the EU declaration of conformity is available at the following internet address: …”
It must state the exact internet address at which the full declaration can be accessed. That address has to remain reachable – a link to a page that disappears with the next website redesign is an avoidable risk.
Source: Art. 13(20) CRA · Annex VI CRA · Art. 28(2) CRA
CE marking
The CE marking is affixed before the product is placed on the market – visibly, legibly and indelibly on the product. Where the nature of the product does not allow this, it is affixed to the packaging and to the EU declaration of conformity accompanying the product. For software, it is affixed either to the EU declaration of conformity or on the website accompanying the software product; that section of the website must be easily and directly accessible to consumers. Where a notified body is involved under module H, the CE marking is followed by its identification number (Art. 30).
Source: Art. 30(1), (3) and (4) CRA
Retention
The manufacturer keeps the EU declaration of conformity together with the technical documentation for at least ten years after the product has been placed on the market or for the support period, whichever is longer (Art. 13(13)). A copy also belongs in the technical documentation (Annex VII, point 7).
Source: Art. 13(13) CRA · Annex VII, point 7 CRA
In practice
- Keep one declaration per product type and issue a new, dated version when something changes; archive older versions.
- Publish the full declaration at a permanent address and state that address in the simplified declaration.
- Check which other Union legal acts apply (for example for radio equipment) and include them in the same declaration.
- Prepare language versions for all target markets.
Related guides
- Product and evidenceTechnical documentation under the Cyber Resilience Act7 min read
- Product and evidenceImportant and critical products under the Cyber Resilience Act3 min read
- Product and evidenceSupport period under the Cyber Resilience Act: at least five years?3 min read
- Product and evidenceConformity assessment under the CRA: module A, B + C or H11 min read
- Product and evidenceUser information under Annex II CRA: what must accompany a product8 min read
Terms in the Cyber Resilience Act glossary
Sources
First published 19 Oct 2026, last updated 19 Oct 2026. This guide reflects the wording of the regulation and the Commission’s guidelines and does not constitute legal advice.