Importers and distributors under the CRA: duties, manufacturer role
10 min read
The Cyber Resilience Act does not only place obligations on manufacturers. Anyone who brings connected electronics, IoT devices or software from third countries into the EU, or resells them, has their own obligations to check, report and keep records. And anyone who sells goods under their own brand or substantially modifies them becomes the manufacturer. This guide shows what the Regulation requires of importers and distributors.
Importer, distributor, authorised representative: the roles
The Regulation distinguishes the following roles (Art. 3):
- Importer: a person established in the Union who places on the market a product with digital elements that bears the name or trademark of a person established outside the Union (Art. 3(16)).
- Distributor: a person in the supply chain, other than the manufacturer or the importer, that makes a product with digital elements available on the Union market without affecting its properties (Art. 3(17)).
- Authorised representative: a person established within the Union who has received a written mandate from a manufacturer to act on its behalf in relation to specified tasks (Art. 3(15)).
- Economic operator: the umbrella term for the manufacturer, the authorised representative, the importer, the distributor and any other person subject to obligations under the Regulation in relation to the manufacture or making available of products with digital elements (Art. 3(12)).
Two further terms determine which obligation applies when: “placing on the market” is the first making available of a product on the Union market (Art. 3(21)). “Making available on the market” is any supply for distribution or use on the Union market in the course of a commercial activity, whether in return for payment or free of charge (Art. 3(22)). The importer places on the market, the distributor makes available.
A product with digital elements is a software or hardware product and its remote data processing solutions, including software or hardware components placed on the market separately (Art. 3(1)). The roles therefore apply to devices and software alike.
When the obligations apply
The Regulation applies from 11 December 2027 – including the obligations of importers and distributors in Articles 19 and 20. Only the manufacturers’ reporting obligations under Article 14 (since 11 September 2026) and Chapter IV on the notification of conformity assessment bodies (since 11 June 2026) apply earlier (Art. 71(2)).
Products placed on the market before 11 December 2027 are subject to the requirements of the Regulation only if they are substantially modified from that date (Art. 69(2)). The reporting obligations under Article 14, however, also apply to them (Art. 69(3)).
Anyone who has products manufactured and markets them under their own name or trademark is already a manufacturer under the definition (Art. 3(13)) – and has therefore been subject to the reporting obligations since 11 September 2026.
Source: Art. 71(2) CRA · Art. 69(2) and (3) CRA · Art. 3(13) CRA
Obligations of importers
Importers place on the market only products that comply with the essential cybersecurity requirements in Part I of Annex I and where the manufacturer’s processes comply with Part II of Annex I – including its vulnerability handling (Art. 19(1)). Before placing a product on the market, they ensure (Art. 19(2)):
- that the manufacturer has carried out the conformity assessment under Article 32 and drawn up the technical documentation,
- that the product bears the CE marking and is accompanied by the EU declaration of conformity and the information and instructions under Annex II – in a language easily understood by users and market surveillance authorities,
- that the manufacturer has marked the product with a type, batch or serial number, indicated its contact details and stated the end of the support period with at least the month and year (Art. 13(15), (16) and (19)).
Importers must be able to provide the documents proving that these requirements are fulfilled (Art. 19(2), second subparagraph). In addition:
- Doubts: if they consider the product or the manufacturer’s processes not to be in conformity, they place it on the market only once conformity has been established; where there is a significant cybersecurity risk, they inform the manufacturer and market surveillance. A possible significant risk in light of non-technical risk factors is reported to market surveillance (Art. 19(3)).
- Their own details: name, registered trade name or registered trademark, postal address, email address or other digital contact and, where applicable, website – on the product, its packaging or in an accompanying document (Art. 19(4)).
- After placing on the market: in case of non-conformity they immediately take corrective measures, up to withdrawal or recall. They inform the manufacturer of a vulnerability without undue delay; where there is a significant cybersecurity risk, they also immediately inform the market surveillance authorities of the Member States in which they have made the product available (Art. 19(5)).
- Record keeping: a copy of the EU declaration of conformity for at least 10 years after placing on the market or for the support period, whichever is longer; they must be able to make the technical documentation available on request (Art. 19(6)).
- Authority requests: provide all information and documentation demonstrating conformity on a reasoned request and cooperate on measures to eliminate cybersecurity risks (Art. 19(7)).
- Manufacturer gone: if the manufacturer has ceased its operations and can no longer comply with its obligations, they inform market surveillance and, to the extent possible, the users (Art. 19(8)).
Source: Art. 19 CRA · Art. 13(15), (16), (19) CRA
Obligations of distributors
Distributors “act with due care” in relation to the requirements of the Regulation (Art. 20(1)). Before making a product available, they verify (Art. 20(2)):
- that the product bears the CE marking,
- that the manufacturer and the importer have complied with their obligations under Article 13(15), (16), (18), (19) and (20) and Article 19(4) – identification marking, manufacturer contact details, information and instructions under Annex II, end of the support period, copy of the EU declaration of conformity or simplified declaration with internet address, importer contact details –
- and that they have provided all necessary documents to the distributor.
- Doubts: if a distributor has reason to believe, on the basis of information in its possession, that the product or the manufacturer’s processes do not comply with Annex I, it makes the product available only once conformity has been established; where there is a significant cybersecurity risk, it informs the manufacturer and market surveillance without undue delay (Art. 20(3)).
- After making available: in case of non-conformity it makes sure corrective measures are taken, including withdrawal or recall where appropriate. It informs the manufacturer of a vulnerability without undue delay and, where there is a significant cybersecurity risk, also immediately informs the market surveillance authorities of the Member States concerned (Art. 20(4)).
- Authority requests and cooperation as for importers (Art. 20(5)); report the manufacturer ceasing its operations without undue delay to market surveillance and, to the extent possible, to the users (Art. 20(6)).
The difference from the importer: the distributor does not have to ensure that the conformity assessment and technical documentation exist, but verifies the visible markings and documents. Article 20 sets no separate retention period for the declaration of conformity – Article 23 does, however, for the supply chain.
Source: Art. 20 CRA · Art. 13(15), (16), (18)–(20) CRA
When importers and distributors are themselves the manufacturer
An importer or distributor is considered to be a manufacturer and is subject to Articles 13 and 14 where it (Art. 21):
- places a product on the market under its own name or trademark – for example goods from a contract manufacturer sold as a private label –, or
- carries out a substantial modification of a product already placed on the market.
A modification is substantial if, after placing on the market, it affects compliance with the essential cybersecurity requirements in Part I of Annex I or changes the intended purpose for which the product was assessed (Art. 3(30)).
A person other than the manufacturer, importer or distributor who substantially modifies a product and makes it available on the market is also considered to be a manufacturer – for the part affected by the modification, or for the entire product if the modification has an impact on its cybersecurity as a whole (Art. 22).
As manufacturer you then bear the full obligations of Article 13 – risk assessment, technical documentation, conformity assessment, vulnerability handling during the support period – and the reporting obligations under Article 14.
Source: Art. 21 CRA · Art. 22 CRA · Art. 3(30) CRA
Online marketplaces and online retail
According to Recital 78, a provider of an online marketplace that provides only online intermediation services is not an economic operator within the meaning of the Regulation. If the marketplace itself distributes a product, however, it is considered a distributor for that product; if it sells its own branded products, a manufacturer. Some entities may qualify as fulfilment service providers – to be assessed case by case.
Source: Recital 78 CRA
Proving the supply chain: 10 years
All economic operators provide market surveillance, on request, with the name and address of any economic operator who supplied them with a product and – where available – of any economic operator to whom they supplied it (Art. 23(1)). They must be able to present this information for 10 years after being supplied and for 10 years after supplying the product (Art. 23(2)).
Source: Art. 23 CRA
Fines
Non-compliance with the obligations in Articles 18 to 23 – including those of importers and distributors – is subject to fines of up to EUR 10 million or, if the offender is an undertaking, up to 2 % of its total worldwide annual turnover for the preceding financial year, whichever is higher (Art. 64(3)). For non-compliance with Articles 13 and 14 – the obligations that apply to importers and distributors as manufacturers under Article 21 – Article 64(2) sets up to EUR 15 million or 2.5 %. Incorrect, incomplete or misleading information supplied to notified bodies and market surveillance authorities in reply to a request: up to EUR 5 million or 1 % (Art. 64(4)). The detailed rules on penalties are laid down by the Member States (Art. 64(1)).
Source: Art. 64(1)–(4) CRA
In practice: what to request from suppliers
- Record your role per product: do you place it on the market as importer, make it available as distributor – or sell it under your own brand and are therefore the manufacturer?
- Request from the manufacturer: the EU declaration of conformity, confirmation of the conformity assessment carried out (where needed, the notified body’s certificate), a commitment to make the technical documentation available to market surveillance on request, user information under Annex II in the languages of your markets, the end of the support period and a contact point for vulnerabilities.
- Check incoming goods: CE marking, type, batch or serial number, contact details of manufacturer and importer, end of support, enclosed declaration of conformity.
- Agree a reporting path: to whom at the manufacturer you report vulnerabilities, who on your side decides whether there is a significant cybersecurity risk, and who then informs market surveillance.
- Document the supply chain: file suppliers and customers so that you can name them on request for 10 years.
- Check before changes: replacing firmware, unlocking or rebuilding functions, changing the purpose – clarify beforehand whether this is a substantial modification.
- Agree contractually what happens if the manufacturer ceases operations or updates stop.
Checklist before selling
- CE marking present
- EU declaration of conformity (or simplified declaration with internet address) enclosed
- Information and instructions under Annex II in an easily understood language
- Type, batch or serial number and manufacturer contact details
- End of the support period (at least month and year) stated
- As importer: own contact details affixed, conformity assessment and technical documentation confirmed
- Supplier and customer documented for 10 years
- No sale under your own brand and no substantial modification – otherwise the manufacturer obligations apply
Related guides
- Economic operatorsManufacturers outside the EU: what the Cyber Resilience Act requires6 min read
- Product and evidenceSubstantial modification: when does an update make a new product?7 min read
- Product and evidenceEU declaration of conformity under the Cyber Resilience Act4 min read
- Product and evidenceUser information under Annex II CRA: what must accompany a product8 min read
- Reporting obligationsCyber Resilience Act: reporting under Art. 14, step by step7 min read
- Economic operatorsPenalties under the Cyber Resilience Act: maximum fines, exemptions5 min read
Terms in the Cyber Resilience Act glossary
Sources
- Art. 3 CRA
- Art. 13 CRA
- Art. 18 CRA
- Art. 19 CRA
- Art. 20 CRA
- Art. 21 CRA
- Art. 22 CRA
- Art. 23 CRA
- Art. 64 CRA
- Art. 69 CRA
- Art. 71 CRA
- Recital 78 CRA
First published 9 Nov 2026, last updated 9 Nov 2026. This guide reflects the wording of the regulation and the Commission’s guidelines and does not constitute legal advice.