Machinery Regulation and cybersecurity: what applies from 2027
As of 5 min read
From 20 January 2027, the Machinery Regulation (EU) 2023/1230 replaces the Machinery Directive. New are explicit requirements for protection against tampering and for the safety of control systems. Many machines with software also fall under the Cyber Resilience Act. This guide summarises what the regulation lays down.
From when and for whom
The regulation applies from 20 January 2027; the Machinery Directive 2006/42/EC is repealed on the same date. The date comes from the corrigendum of 4 July 2023 – the originally published text still stated 14 January 2027.
It covers machinery and related products, including safety components, as well as partly completed machinery. A safety component can expressly also be a digital component, including software, if it is placed on the market separately and fulfils a safety function.
Source: Art. 54 Machinery Regulation · Art. 51 Machinery Regulation · Corrigendum to the Machinery Regulation, OJ L 169 of 4 July 2023 · Art. 2(1) Machinery Regulation · Art. 3, point 3 Machinery Regulation
Protection against corruption (Annex III, section 1.1.9)
- Connecting another device to the machine – directly or via remote access – must not lead to a hazardous situation.
- Hardware transmitting signals or data relevant for connection to or access to software that is critical for safety must be adequately protected against accidental or intentional corruption; legitimate and illegitimate interventions in that component must be traceable.
- Software and data that are critical for the compliance with the safety requirements must be identified as such and adequately protected.
- The machine must identify the software installed on it that is necessary for its safe operation and make this information easily accessible at all times.
- Interventions in the software and modifications of the installed software or its configuration must be traceable.
Safety and reliability of control systems (Annex III, section 1.2.1)
Control systems must – where appropriate to the circumstances and the risks – also withstand reasonably foreseeable malicious attempts by third parties leading to a hazardous situation. Faults in the hardware or software, errors in the control system logic and reasonably foreseeable human error during operation must not lead to hazardous situations; the limits of the safety functions follow from the manufacturer’s risk assessment.
Recording obligation: the log of data on interventions and of the versions of safety software uploaded after the machine has been placed on the market must remain accessible for up to five years after upload – exclusively to demonstrate conformity and upon a reasoned request of a competent national authority.
Control systems with fully or partially self-evolving behaviour are subject to further obligations, for example recording safety-related decisions, which are stored for one year.
Relationship with the Cyber Resilience Act
If a machine is also a product with digital elements, the manufacturer must comply with both sets of rules: the essential cybersecurity requirements of the Cyber Resilience Act and the health and safety requirements of the Machinery Regulation. It also follows the conformity assessment procedures of both regulations.
According to Recital 53 of the Cyber Resilience Act, fulfilling its requirements can facilitate compliance with sections 1.1.9 and 1.2.1. This is not an automatic presumption of conformity: the manufacturer must demonstrate the synergies, for example through harmonised standards or other technical specifications, after assessing the relevant cybersecurity risks. The Commission is to provide guidelines on this.
The Machinery Regulation itself provides for a presumption: where a machine has been certified, or a statement of conformity issued, under a cybersecurity certification scheme of Regulation (EU) 2019/881, sections 1.1.9 and 1.2.1 are presumed to be met in so far as the certificate covers them.
For the transition: where a product has received an EU type-examination certificate or approval decision under the Machinery Regulation on the basis of these requirements, it remains valid under Art. 69(1) of the Cyber Resilience Act for the cybersecurity risks it covers – for as long as it is valid, and no later than 11 June 2028. According to the Commission guidance, the manufacturer does not have to reassess conformity for those risks for the purposes of the Cyber Resilience Act. Where its risk assessment under Art. 13(2) identifies further risks not covered by the certificate, it addresses them under the Cyber Resilience Act.
Source: Recital 53 CRA · Art. 20(9) Machinery Regulation · Art. 69(1) CRA · Commission guidance C/2026/6013 (OJ C, 17 Nov 2026), points 255–257
When a notified body is needed
- Annex I, Part A (among others safety components and embedded systems with fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions): always with a notified body (Art. 25(2)).
- Annex I, Part B (among others no. 17 “logic units to ensure safety functions”): internal production control (module A) only if harmonised standards or common specifications covering all relevant requirements have been applied; otherwise with a notified body (Art. 25(3)).
Source: Annex I Machinery Regulation · Art. 25(2) and (3) Machinery Regulation
Technical documentation
The technical documentation includes the risk assessment with the applicable requirements and the protective measures implemented. The manufacturer provides the source code or programming logic of safety-related software only upon a reasoned request of a competent national authority, where necessary to check conformity.
Source: Annex IV, Part A, points (b) and (m) Machinery Regulation
In practice
- Clarify which products are machinery, safety components or partly completed machinery and which of them also fall under the Cyber Resilience Act.
- Identify safety-relevant software and data; make the installed software versions retrievable for each machine.
- Design the control system so that interventions and configuration changes are traceable and the log of interventions and uploaded safety software versions is accessible for authority requests for up to five years.
- Assess cybersecurity risks once and record for each measure which requirement of Annex I of the Cyber Resilience Act and which section of Annex III of the Machinery Regulation it covers – this is the evidence of synergies under Recital 53.
- Follow the standards situation for both regulations – the presumption of conformity depends on harmonised standards published in the Official Journal.
Related guides
Terms in the Cyber Resilience Act glossary
Sources
- Regulation (EU) 2023/1230 (Machinery Regulation), Art. 2, 3, 20, 25, 51, 54, Annexes I, III, IV (EUR-Lex)
- Corrigendum to Regulation (EU) 2023/1230, OJ L 169 of 4 July 2023
- Regulation (EU) 2024/2847 (Cyber Resilience Act), Art. 13(2), Art. 69(1), Recital 53 (EUR-Lex, Official Journal)
- Commission guidance on the application of the Cyber Resilience Act, C/2026/6013, OJ C, 17 Nov 2026 (non-binding)
Status of the Commission guidance: the Commission approved its content on 27 July 2026 (C(2026) 5252). On 17 November 2026 the guidance was published in the Official Journal as Communication C/2026/6013, in all official languages. According to our comparison, the point numbers have not changed. The guidance is not binding, but it shows how the Commission reads the Regulation (as of 11/2026).
First published 20 Oct 2026, last updated 18 Nov 2026. This guide reflects the wording of the regulation and the Commission’s guidelines and does not constitute legal advice.