Skip to content
Related legislation

AI in machinery and robots: Machinery Regulation, CRA and AI Act

10 min read

If you build robots, machinery or control systems with AI, three EU regulations apply: the Machinery Regulation (EU) 2023/1230, the Cyber Resilience Act (EU) 2024/2847 and the AI Act (EU) 2024/1689. In 2026, the Digital Omnibus (EU) 2026/1744 reorganised how AI in machinery is treated. This guide takes you step by step through the questions manufacturers should ask.

Three regulations, one product: the timeline

  • Machinery Regulation: applies from 20 January 2027 and replaces the Machinery Directive 2006/42/EC. The date comes from the corrigendum of 4 July 2023; the originally published text still stated 14 January 2027.
  • Cyber Resilience Act: reporting obligations from 11 September 2026, the remaining obligations from 11 December 2027 – for machinery that is also a product with digital elements.
  • AI Act after the Digital Omnibus: the requirements for high-risk AI systems apply to systems under Annex III from 2 December 2027 and to systems in products under Annex I – which includes machinery – from 2 August 2028.

The annexes of the Machinery Regulation do not list robots as such. What matters is not whether a product is called a “robot”, but what its software – and in particular its AI – does, above all whether it performs a safety function.

Source: Art. 54 Machinery Regulation · Art. 51 Machinery Regulation · Corrigendum to the Machinery Regulation, OJ L 169 of 4 July 2023 · Art. 71 CRA · Art. 1, point 40 Regulation (EU) 2026/1744 · Annex I Machinery Regulation

Step 1: Does the AI perform a safety function?

The Machinery Regulation does not distinguish between “with AI” and “without AI”; it asks about self-evolving behaviour using machine learning approaches. Two entries in Annex I, Part A cover exactly this:

  • No. 5: safety components with fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions.
  • No. 6: machinery that has embedded systems with such behaviour ensuring safety functions that have not been placed on the market separately – in respect only of those systems.

A safety component can expressly also be a digital component, including software, if it is placed on the market separately. According to Recital 55, software that is neither capable of learning nor of evolving and is only programmed to perform certain automated functions is not subject to this third-party assessment.

For conventional safety technology without machine learning, two entries in Annex I, Part B matter: no. 15 “safety devices designed to detect the presence of persons” and no. 17 “logic units to ensure safety functions”.

Source: Annex I, Part A, nos. 5 and 6, and Part B, nos. 15 and 17 Machinery Regulation · Art. 3, point 3 Machinery Regulation · Recital 55 Machinery Regulation

Step 2: The right conformity assessment procedure

  1. Annex I, Part A (including AI with a safety function under nos. 5 and 6): always with a notified body – modules B and C, module H or module G (Annexes VII to X). Internal production control is not possible (Art. 25(2)).
  2. Annex I, Part B (e.g. logic units to ensure safety functions): internal production control (module A) only if harmonised standards or common specifications have been applied that cover all relevant essential health and safety requirements; otherwise B and C, H or G (Art. 25(3)).
  3. Not listed in Annex I: internal production control (module A) by the manufacturer (Art. 25(4)).

The Commission can amend Annex I by delegated act. The list is therefore not fixed for ever.

Source: Art. 25(2) to (4) Machinery Regulation · Art. 6 Machinery Regulation · Annex I Machinery Regulation

Step 3: Designing the control system (Annex III, section 1.2.1)

Control systems must withstand the intended operating stresses and external influences, including reasonably foreseeable malicious attempts by third parties. Faults in hardware or software and errors in the control logic must not lead to hazardous situations. The manufacturer sets the limits of the safety functions in the risk assessment; settings and rules must not be modified in a hazardous way – not even during the learning phase. With wireless control, a loss of the connection must not lead to a hazardous situation.

For control systems with self-evolving behaviour or logic designed to operate with varying levels of autonomy, the following also applies:

  • The machine must not perform actions beyond its defined task and movement space.
  • Recording of data on the safety-related decision-making process is enabled; the data are retained for one year after their collection in order to demonstrate conformity upon a reasoned request of a competent national authority.
  • It must be possible to correct the machine at any time.

For all control systems: the tracing log of data generated in relation to an intervention and of the versions of safety software uploaded after placing on the market must be enabled for five years after such upload – exclusively to demonstrate conformity, upon a reasoned request of a competent national authority.

These records are worded as a design requirement for the control system (“control systems shall be designed and constructed in such a way that …”) – the log and its storage are properties of the product. The text does not expressly oblige the manufacturer to keep the data itself, and it leaves open where the data are held (machine, user, manufacturer). This is our reading of the wording, not a confirmed interpretation.

Further sections of Annex III address AI and autonomy: the risk assessment also covers hazards arising from the intended evolution of self-evolving behaviour; section 1.1.6 (ergonomics) deals with the human-machine interface for self-evolving behaviour – the machine should respond to people adequately and communicate its planned actions comprehensibly; section 1.3.7 concerns the coexistence of people and machines in a shared space; chapter 3 contains requirements for autonomous mobile machinery.

Source: Annex III, general principle 1, sections 1.1.6, 1.2.1, 1.3.7, chapter 3 Machinery Regulation

Step 4: Protection against tampering (Annex III, section 1.1.9)

  • Connecting another device, or remote access, must not lead to a hazardous situation.
  • Hardware relevant for access to safety-critical software must be adequately protected against accidental or intentional corruption; the machine must collect evidence of legitimate or illegitimate interventions in that component.
  • Safety-critical software and data must be identified and protected.
  • The installed software necessary for safe operation must be identified and made easily accessible at all times.
  • Interventions in the software and modifications of its configuration must be traceable.

Where the machine has been certified, or a statement of conformity issued, under a cybersecurity certification scheme of Regulation (EU) 2019/881, sections 1.1.9 and 1.2.1 are presumed to be met – in so far as the certificate covers them (Art. 20(9)).

Source: Annex III, section 1.1.9 Machinery Regulation · Art. 20(9) Machinery Regulation

Step 5: Technical documentation for AI and autonomy

  • The risk assessment with the applicable requirements and the protective measures implemented (point (b)).
  • The source code or programming logic of the safety-related software – to be provided upon a reasoned request of a competent national authority, where necessary to check conformity (point (m)).
  • For sensor-fed, remotely driven or autonomous machinery: a description of the characteristics, capabilities and limitations of the system, of the data used and of the development, testing and validation processes (point (n)).

Source: Annex IV, Part A, points (b), (m) and (n) Machinery Regulation

Step 6: The Cyber Resilience Act also applies

If the machine is also a product with digital elements, the manufacturer must comply with both regulations and follow the conformity assessment procedures of both. There is a single EU declaration of conformity for all legal acts.

According to Recital 53 of the Cyber Resilience Act, fulfilling its requirements can facilitate compliance with sections 1.1.9 and 1.2.1 of the Machinery Regulation. This is not a presumption of conformity: the manufacturer must demonstrate the synergies, for example through harmonised standards following a risk assessment.

For high-risk AI systems, the Cyber Resilience Act has a rule of its own (Art. 12): if such a product meets the requirements of Annex I, Part I and the processes under Part II of the CRA, and this is demonstrated in the declaration of conformity, it is deemed to comply with the cybersecurity requirements of Art. 15 of the AI Act. The conformity assessment then in principle follows Art. 43 of the AI Act. Recital 51 names AI-specific vulnerabilities such as data poisoning and adversarial attacks that belong in the risk assessment.

Source: Recital 53 CRA · Art. 28(3) CRA · Art. 12 CRA · Recital 51 CRA

Step 7: What the Digital Omnibus changed in the AI Act

Under Art. 6(1) of the AI Act, an AI system is high-risk if it is intended to be used as a safety component of a product covered by the legislation listed in Annex I (or is itself such a product), and if that product is subject to a third-party conformity assessment.

Regulation (EU) 2026/1744 of 8 July 2026 changed the following for machinery:

  • The Machinery Directive 2006/42/EC was deleted from Annex I, Section A of the AI Act; the Machinery Regulation (EU) 2023/1230 is now listed in Annex I, Section B. Recital 42 refers to a move to a sector-specific approach.
  • For high-risk AI systems under Art. 6(1) related to products in Annex I, Section B, only Art. 6(1), Art. 60a and Art. 102 to 112 of the AI Act apply. The AI Act's requirements for high-risk AI – including Art. 15 – therefore no longer apply directly to AI in machinery.
  • Instead, the Commission adopts delegated acts supplementing Annex III of the Machinery Regulation with requirements for high-risk AI systems (based on Chapter III, Section 2 and Art. 17, 19, 72 and 73 of the AI Act). They apply from 2 August 2028.
  • Until there are standards of its own under the Machinery Regulation, harmonised standards and common specifications under Art. 40 and 41 of the AI Act give rise to a presumption of conformity (new Art. 20(10) of the Machinery Regulation).

For AI in machinery, the AI requirements will therefore come through the Machinery Regulation – with its procedures and its declaration of conformity. We read the amending regulation in the Official Journal, not the consolidated versions.

Source: Art. 6(1) AI Act · Annex I AI Act · Art. 1, points 2, 40 and 41 Regulation (EU) 2026/1744 · Art. 3 (amendment of the Machinery Regulation) Regulation (EU) 2026/1744 · Recital 42 Regulation (EU) 2026/1744

What is still open

  • Art. 12 CRA and AI in machinery: AI with a safety function in machinery remains a high-risk AI system under Art. 6(1). Of the AI Act, however, only Art. 6(1), Art. 60a and Articles 102 to 112 now apply to it – not Art. 15 (cybersecurity) and Art. 43 (conformity assessment), to which Art. 12 CRA refers. The new Art. 42(3) of the AI Act, which mirrors the rule of Art. 12 CRA there, is not among them either. In our reading, Art. 12 CRA therefore no longer has any scope for AI in machinery: cybersecurity would be demonstrated under the procedures of the Cyber Resilience Act, and the AI requirements under the Machinery Regulation. Neither the Cyber Resilience Act nor Regulation (EU) 2026/1744 says so expressly. The Commission guidance of November 2026 does not settle it; it announces possible further guidance on the interplay between the Cyber Resilience Act and the AI Act (point 9).
  • The Commission is to provide guidance on the relationship between the Cyber Resilience Act and the Machinery Regulation (Recital 53 CRA). So far, the guidance of November 2026 only states that certificates under the Machinery Regulation remain valid for the cybersecurity risks they cover until 11 June 2028 at the latest (points 255 to 257, Art. 69(1) CRA).
  • We have not checked the content of the delegated acts with AI requirements for machinery or the harmonised standards under the Machinery Regulation.
  • Where the records under Annex III, section 1.2.1 must be held is left open by the text.

Source: Art. 12 CRA · Recital 53 CRA · Art. 1, points 2 and 18 Regulation (EU) 2026/1744 · Recital 19 Regulation (EU) 2026/1744 · Art. 3 Regulation (EU) 2026/1744 · Commission guidance C/2026/6013 (OJ C, 17 Nov 2026), points 9, 255–257 · Annex III, section 1.2.1 Machinery Regulation

In practice: your next steps

  1. For each product, record: is it machinery, a safety component or partly completed machinery – and is it also a product with digital elements under the Cyber Resilience Act?
  2. List every safety function and check whether machine learning with self-evolving behaviour is involved. If so: Annex I, Part A, no. 5 or 6 – plan for a notified body.
  3. For logic units and person detection (Annex I, Part B), clarify whether harmonised standards are applied in full; otherwise a notified body is needed as well.
  4. Design the control system so that task and movement space stay limited, it can be corrected at any time, and it generates the required records and makes them accessible for authority requests.
  5. Assess cybersecurity risks once (including AI-specific attacks) and record for each measure which requirement of Annex I CRA and which section of Annex III of the Machinery Regulation it covers.
  6. Extend the technical documentation with a description of capabilities, limitations, data and development, testing and validation processes.
  7. Note 2 August 2028 for the AI requirements from the delegated acts under the Machinery Regulation and follow the Commission's publications.

Related guides

Terms in the Cyber Resilience Act glossary

Sources

Status of the Commission guidance: the Commission approved its content on 27 July 2026 (C(2026) 5252). On 17 November 2026 the guidance was published in the Official Journal as Communication C/2026/6013, in all official languages. According to our comparison, the point numbers have not changed. The guidance is not binding, but it shows how the Commission reads the Regulation (as of 11/2026).

First published 18 Nov 2026, last updated 18 Nov 2026. This guide reflects the wording of the regulation and the Commission’s guidelines and does not constitute legal advice.